فهم البرنامج
تنزيل وتثبيت البرنامج
لمحة شاملة عن واجهة المستخدم
بناء Simple Case
دراسة المعاملات لاختيار أفضل قيمة
محاكاة شبكة الانتاج وايجاد الطاقة الانتاجية
بناء empty case من الصفر ومحاكاتها
مشكلة الـ Slugging
تحديد موضع حدوث مشكلة الـ Slugging
حل مشكلة Slugging باستخدام الشوك
حل مشكلة Slugging باستخدام المصعد الغازي
تعقب الـ Slug Tracking
محاكاة الـ Pig
محاكاة الـ Pig في حالة عدم وجود Slug لمائع black oil
محاكاة الـ Pig في حالة عدم وجود Slug لمائع compositional
محاكاة الـ Pig في حالة وجود Slug لمائع black oil
محاكاة الـ Pig في حالة وجود Slug لمائع compositional
مشكلة الهيدرات
تحديد المكان الذي يبدأ عنده تكون الهيدرات
الطريقة الغير اقتصادية لحل مشكلة الهيدرات
الطريقة الاقتصادية لحل مشكلة الهيدرات
مشكلة الـ wax
تحديد المكان الذي يبدأ عنده تكون الـ wax
الطريقة الغير اقتصادية لحل مشكلة الـ wax
الطريقة الاقتصادية لحل مشكلة الـ wax
محاكاة الـ Drilling
الحفر وحركة عمود الحفر
التسجــــــــيــل بالبرنامج
Install Software
Project Setting and user Interface Review
Three Methods to Import Data
Data Visualization Methods
Design Reservoir Boundary
Create Surfaces From Contour Maps.
Create Surfaces From Well Tops.
Create Simple Grid.
Create Horizons and Layers.
Loading and Viewing Well Logs.
Geometrical Modeling.
Well Logs Upscaling.
Facies Modeling
Petrophysical Modeling.
Property Calculator.
STOIIP Calculations.
Import Files from PIPESIM and ECLIPSE
Dynamic Simulation.
Design New Well to the Target.
Design Well Completion.
Create Fluid Models.
Calculate Optimum Oil Flowrate and Bottomhole Pressure.
التسجــــــــيــل بالبرنامج
التسجــــــــيــل بالبرنامج
Project Setting and user Interface Review
How to design a Pump using Quick Calculation Mode
How to Input all required Data
How to Select the pump automatically.
How to Select the pump manually.
How to Use Sensitivity analysis to choose the best pump
How to activate the disabled tabs
How to design a Pump using Rigorous Calculation Mode
How to change the pump stages to fit the Well circumsrances.
How to optimize the pump to fit the Well circumstances.
How to add a new pump to the existing manufacturer
How to add a new pump that doesn't exist in the catalog
The End
التسجــــــــيــل بالبرنامج
1) Build the well model
2) Perform a NODAL analysis
3) Generate a pressure/temperature profile
4) Calibrate PVT data
5) Sensitize on the well PI to match well performance
6) Analyze water cut sensitivity
7) Evaluate gas lift performance
8) Model multiple completions
9) Model a downhole choke
1) Create a compositional fluid model for a gas well.
2) Calculate gas well deliverability.
3) Calibrate the inflow model using multipoint test data.
4) Select a tubing size.
5) Model a flowline and choke.
6) Predict future production rates.
7) Determine a critical gas rate to prevent well loading
1) Size the subsea tieback and riser.
2) Select tieback insulation thickness.
3) Determine the methanol requirement.
4) Screen for severe riser slugging.
5) Size a slug catcher.
1) Model a pipeline network
2) Screen the network for erosion Issues
1) build the network model on a GIS map.
2) Automatic creation of a network model on the GIS map.
3) Use of inline heating for wax mitigation.
التسجــــــــيــل بالبرنامج